White County Prevailing Wage for December 2008
-
Trade Name RG TYP C Base FRMAN *M-F>8 OSA OSH H/W Pensn Vac Trng
==================== == === = ====== ====== ===== === === ===== ===== ===== =====
ASBESTOS ABT-GEN ALL 22.000 22.450 1.5 1.5 2.0 5.450 6.750 0.000 0.800
ASBESTOS ABT-MEC BLD 20.800 0.000 2.0 2.0 2.0 5.500 4.200 0.000 0.000
BOILERMAKER BLD 30.000 32.500 1.5 1.5 2.0 6.820 11.28 1.000 0.350
BRICK MASON BLD 26.260 27.760 1.5 1.5 2.0 6.900 6.200 0.000 0.430
CARPENTER BLD 29.530 31.030 1.5 1.5 2.0 5.550 4.250 0.000 0.350
CARPENTER HWY 29.480 31.230 1.5 1.5 2.0 5.550 4.250 0.000 0.350
CEMENT MASON BLD 24.400 25.400 1.5 1.5 2.0 5.400 4.450 0.000 0.300
CEMENT MASON HWY 23.980 25.480 1.5 1.5 2.0 5.400 4.330 0.000 0.300
CERAMIC TILE FNSHER BLD 24.990 0.000 1.5 1.5 2.0 6.900 6.200 0.000 0.430
ELECTRICIAN ALL 34.070 36.320 1.5 1.5 2.0 5.150 7.490 0.000 0.510
ELECTRONIC SYS TECH BLD 26.740 28.240 1.5 1.5 2.0 5.150 3.470 0.000 0.250
FLOOR LAYER BLD 27.680 27.980 1.5 1.5 2.0 5.550 4.250 1.000 0.350
GLAZIER BLD 25.180 26.180 1.5 1.5 2.0 4.550 3.800 0.000 0.300
HT/FROST INSULATOR BLD 26.110 27.110 1.5 1.5 2.0 4.800 6.860 0.000 0.190
IRON WORKER ALL 24.000 25.250 1.5 1.5 2.0 5.780 7.850 0.000 0.345
LABORER BLD 22.000 22.450 1.5 1.5 2.0 5.450 6.750 0.000 0.700
LABORER HWY 22.000 22.450 1.5 1.5 2.0 5.450 6.400 0.000 0.700
MACHINIST BLD 40.530 42.530 1.5 1.5 2.0 7.000 7.670 0.650 0.000
MARBLE FINISHERS BLD 24.990 0.000 1.5 1.5 2.0 6.900 6.200 0.000 0.430
MARBLE MASON BLD 26.260 27.760 1.5 1.5 2.0 6.900 6.200 0.000 0.430
MILLWRIGHT BLD 29.530 31.030 1.5 1.5 2.0 5.550 4.250 0.000 0.350
MILLWRIGHT HWY 29.980 31.730 1.5 1.5 2.0 5.550 4.250 0.000 0.350
OE RIVER 1 RIV 1 28.400 0.000 1.5 1.5 2.0 5.650 6.500 0.000 1.200
OE RIVER 2 RIV 2 24.950 0.000 1.5 1.5 2.0 5.650 6.500 0.000 1.200
OPERATING ENGINEER ALL 1 28.300 29.300 1.5 1.5 2.0 5.650 6.500 0.000 1.200
OPERATING ENGINEER ALL 2 26.400 29.300 1.5 1.5 2.0 5.650 6.500 0.000 1.200
OPERATING ENGINEER ALL 3 24.150 29.300 1.5 1.5 2.0 5.650 6.500 0.000 1.200
OPERATING ENGINEER ALL 4 21.400 27.800 1.5 1.5 2.0 5.650 6.100 0.000 1.100
OPERATING ENGINEER O&C 1 21.230 22.230 1.5 1.5 2.0 5.650 6.500 0.000 1.200
OPERATING ENGINEER O&C 2 19.800 22.230 1.5 1.5 2.0 5.650 6.500 0.000 1.200
OPERATING ENGINEER O&C 3 18.120 22.230 1.5 1.5 2.0 5.650 6.500 0.000 1.200
OPERATING ENGINEER O&C 4 16.050 21.100 1.5 1.5 2.0 5.650 6.100 0.000 1.100
PAINTER BLD 24.450 25.450 1.5 1.5 2.0 5.650 4.100 0.000 0.300
PAINTER HWY 25.600 26.600 1.5 1.5 2.0 5.650 4.100 0.000 0.300
PAINTER OVER 30FT BLD 25.200 26.200 1.5 1.5 2.0 5.650 4.100 0.000 0.300
PAINTER PWR EQMT BLD 25.450 26.450 1.5 1.5 2.0 5.650 4.100 0.000 0.300
PAINTER PWR EQMT HWY 26.600 27.600 1.5 1.5 2.0 5.650 4.100 0.000 0.300
PILEDRIVER BLD 29.530 31.030 1.5 1.5 2.0 5.550 4.250 0.000 0.350
PILEDRIVER HWY 29.980 31.730 1.5 1.5 2.0 5.550 4.250 0.000 0.350
PIPEFITTER BLD 29.820 31.610 1.5 1.5 2.0 5.550 7.660 0.000 0.700
PLASTERER BLD 23.500 24.500 1.5 1.5 2.0 5.200 3.550 0.000 0.100
PLUMBER BLD 29.820 31.610 1.5 1.5 2.0 5.550 7.660 0.000 0.700
ROOFER BLD 25.270 27.270 1.5 1.5 2.0 5.810 4.250 0.000 0.000
SHEETMETAL WORKER ALL 28.080 29.580 1.5 1.5 2.0 6.350 5.650 1.690 0.260
SPRINKLER FITTER BLD 35.140 37.690 1.5 1.5 2.0 7.000 6.200 0.000 0.250
STONE MASON BLD 26.260 27.760 1.5 1.5 2.0 6.900 6.200 0.000 0.430
TERRAZZO FINISHER BLD 24.990 0.000 1.5 1.5 2.0 6.900 6.200 0.000 0.430
TRUCK DRIVER ALL 1 26.540 0.000 1.5 1.5 2.0 8.600 4.800 0.000 0.000
TRUCK DRIVER ALL 2 26.940 0.000 1.5 1.5 2.0 8.600 4.800 0.000 0.000
TRUCK DRIVER ALL 3 27.140 0.000 1.5 1.5 2.0 8.600 4.800 0.000 0.000
TRUCK DRIVER ALL 4 27.390 0.000 1.5 1.5 2.0 8.600 4.800 0.000 0.000
TRUCK DRIVER ALL 5 28.140 0.000 1.5 1.5 2.0 8.600 4.800 0.000 0.000
TUCKPOINTER BLD 26.260 27.760 1.5 1.5 2.0 6.900 6.200 0.000 0.430
Legend: M-F>8 (Overtime is required for any hour greater than 8 worked
each day, Monday through Friday.
OSA (Overtime is required for every hour worked on Saturday)
OSH (Overtime is required for every hour worked on Sunday and Holidays)
H/W (Health & Welfare Insurance)
Pensn (Pension)
Vac (Vacation)
Trng (Training)
Explanations
-
WHITE COUNTY
The following list is considered as those days for which holiday rates
of wages for work performed apply: New Years Day, Memorial/Decoration
Day, Fourth of July, Labor Day, Veterans Day, Thanksgiving Day,
Christmas Day. Generally, any of these holidays which fall on a
Sunday is celebrated on the following Monday. This then makes work
performed on that Monday payable at the appropriate overtime rate for
holiday pay. Common practice in a given local may alter certain days
of celebration such as the day after Thanksgiving for Veterans Day.
If in doubt, please check with IDOL.
EXPLANATION OF CLASSES
ASBESTOS - GENERAL - removal of asbestos material/mold and hazardous
materials from any place in a building, including mechanical systems
where those mechanical systems are to be removed. This includes the
removal of asbestos materials/mold and hazardous materials from
ductwork or pipes in a building when the building is to be demolished
at the time or at some close future date.
ASBESTOS - MECHANICAL - removal of asbestos material from mechanical
systems, such as pipes, ducts, and boilers, where the mechanical
systems are to remain.
CERAMIC TILE FINISHER, MARBLE FINISHER, TERRAZZO FINISHER
Assisting, helping or supporting the tile, marble and terrazzo
mechanic by performing their historic and traditional work assignments
required to complete the proper installation of the work covered by
said crafts. The term "Ceramic" is used for naming the classification
only, and is in no a limitation of the product handled. Ceramic takes
into consideration most hard tiles.
ELECTRONIC SYSTEMS TECHNICIAN
Installation, service and maintenance of low-voltage systems which
utilizes the transmission and/or transference of voice, sound, vision,
or digital for commercial, education, security and entertainment
purposes for the following: TV monitoring and surveillance,
background/foreground music, intercom and telephone interconnect,
field programming, inventory control systems, microwave transmission,
multi-media, multiplex, radio page, school, intercom and sound burglar
alarms and low voltage master clock systems.
Excluded from this classification are energy management systems, life
safety systems, supervisory controls and data acquisition systems not
intrinsic with the above listed systems, fire alarm systems, nurse
call systems and raceways exceeding fifteen feet in length.
TRUCK DRIVER - BUILDING, HEAVY AND HIGHWAY CONSTRUCTION
Class 1. Drivers on 2 axle trucks hauling less than 9 ton. Air
compressor and welding machines and brooms, including those pulled by
separate units, truck driver helpers, warehouse employees, mechanic
helpers, greasers and tiremen, pickup trucks when hauling materials,
tools, or workers to and from and on-the-job site, and fork lifts up
to 6,000 lb. capacity.
Class 2. Two or three axle trucks hauling more than 9 ton but hauling
less than 16 ton. A-frame winch trucks, hydrolift trucks, vactor
trucks or similar equipment when used for transportation purposes.
Fork lifts over 6,000 lb. capacity, winch trucks, four axle
combination units, and ticket writers.
Class 3. Two, three or four axle trucks hauling 16 ton or more.
Drivers on water pulls, articulated dump trucks, mechanics and working
forepersons, and dispatchers. Five axle or more combination units.
Class 4. Low Boy and Oil Distributors.
Class 5. Drivers who require special protective clothing while
employed on hazardous waste work.
OPERATING ENGINEERS - BUILDING, HEAVY AND HIGHWAY CONSTRUCTION
Class 1. APSCO or Equal Spreading Machine, Backhoe, Backfiller, Boom
or Winch Cat, Bituminous Mixplane Machine, Blacksmith, Bituminous
Surfacing Machine, Bull-Dozer, Crane, Shovel, Dragline, Truck Crane,
Pile Driver, Concrete Breaker, Concrete or PumpCrete Pumps, Dinky or
Standard Locomotives, Well or Caisson Drills, Elevating Grader, Fork
Lifts, Flexplane, Gradeall, Hi-Lift Hoists, Guy-Derricks, Hysters,
Mechanic Motor Patrol, Mixers-21 cu. ft. or over, Push Cats, Pulls and
Scrapers, Two Well Point Pumps, Pulverizer or Tiller, PugMill,
Rubber-Tired Farm Type Tractor with Bulldozer/Blade/Auger or hi-lift
over 1/2 yd., Jersey Spreader, Tract-Air used with Drill or Hi-Lift,
Trenching or Ditching Machines, Wood Chipper w/Tractor, Self-Propelled
Roller w/Blade, Equipment Greaser, Self-Propelled Bump Grinder on
Concrete pavement, Boat Operator, Skid-Loaders, Tuggers, Lazer
Screed,and Self-Propelled Chip Spreader (when others run conveyors).
Class 2. Any type tractor pulling any type roller or disc, Two Air
Compressors (220 cu. ft. capacity or over), Two AirTract Drills,
Air-Track Drill w/Compressor, Automatic Bins or Scales w/Compressor
or Generator, Pipeline Boring Machine, Bulk Cement Plant w/Separate
Compressor, Power Operated Bull Float, Hydra-Lift w/Single Motor,
Straw Mulcher Blower w/Spout, Self-Propelled Roller/Compactor,
Back-End man on Bituminous Surfacing Machine, oiler on milling
machine.
Class 3. Air Compressor w/Valve driving piling, Boom or Winch Type
Truck, Two Conveyors, Self-Propelled Concrete Saw, Form Grader, Truck
Crane Oiler, Self-Propelled Vibrator, Rubber Tired Farm Type Tractor
w/Blade/Bulldozer/Auger/hi-lift - 1/2 yd. or less, Elevator Operator,
Man Lift (scissor lift) when lifting materials.
Class 4. Air-Track Drill (one), Belt Drag Machine, Power Broom,
Mechanical Plasterer Applicator, Trac-Air, Air Compressor (220 cu. ft.
or over) One, Air Compressor (under 220 cu. ft) four, Automatic Bin,
Bulk Cement Plant w/Built-in Compressor running off same motor or
electric motor, Fireman or Switchman, Self-Propelled Form Tamper,
Light Plants (4), Welding Machines (4), Pumps (4), or Combination of
four (4) Pumps, Light Plants, Welding Machines, Air-Compressors
(under 220 cu. ft.), Mudjacks or Wood Chipper, Mixers - less than 21
cu. ft. Mortar Mixer w/Skip or Pump, Pipeline Tract Jack. One
Operating Engineer may operate and maintain any combination of the
following pieces of equipment, not to exceed four (4) which shall be
within a reasonable distance, such combination may include any
equipment in this classification: (Compressors, Light Plants,
Generators, Welding Machines, Pumps or Conveyors), One Well- Point
Pump, Two Motor Driven Heaters, One Air Compressor (under 220 cu.
ft.), One Engine-Driven Conveyor, One Motor Driven Heater, One Light
Plant, One Pump, One Welding Machine, One Ulmac or Equal Spreader,
Oilers, and one Generator 10 kw or greater.
OPERATING ENGINEER RIVER WORK 1 - operate the following machines when
working on River Work and Levee Work on the Mississippi and Ohio
Rivers, Lakes and Tributaries: Crane, Shovel, Drageline, Scrapers,
Dredge, Derrick, Pile-Driver, Push Boat, all power boat operators,
Mechanic, Engineman on Dredge, Leverman on Dredge, All Bituminous
Spreader machines, Backhoe, Backfiller, Boom, or Winch Cat, Bituminous
Mixplane Machine, Blacksmith, Bituminous Surfacing Machine,
Bulldozer, Truck Cranes, Hydraulic Truck Mounted Boom/Crane, Concrete
Finishing Machine, or Spreader Machine, Concrete Breaker, Concrete or
Pumpcrete Machines, Concrete Plant Operator, All Off Road Material
Hauling Equipment, Dinky or Standard Locomotives, Well Drill,
Elevating Grader, Fork-Lifts, Flexplane, Gradeall, Hi-Lift, Power
Handblade Tugger type Hoist, Hoist Two Drum (or over one), Guyderrick,
Hyster, Motor Patrol, Mixers - 21 Cu. Ft. or over, Push Cat, Pulls, &
Scrapers, Pumps-Two Well Points, Equipment Greaser, P & H Pulverizer
or Pulverizer equal to Pugmill, Pugmill, Rubber-Tired farm type
tractor w/Bulldozer/Blade/Auger or Hi-Lift over ½ yard, Skimmer
Scoops, Seaman Tiller, Jersey Spreader, Tract-Air used with Drill or
Hi-Lift, Trenching or Ditching Machine, Wood Chipper w/Tractor,
self-propelled roller w/Blade, Concrete Pumps and Small Equipment
Operators.
OPERATING ENGINEER RIVER 2 - when working on River Work and Levee Work
on the Mississippi and Ohio Rivers, Lakes and Tributaries shall be
employed as the Oiler or Fireman on Crane, Dragline, Shovel, Dredge,
Truck Crane, Pile Driver, Gradeall, Dinky or Standard Locomotive, Guy
Derrick, Trenching Machine or Ditching Machine 80 H.P. and over, All
Terrain (cherry-picker) with over 40 ton Lifting Capacity, Deck Oiler
and Deckhands.
Other Classifications of Work:
For definitions of classifications not otherwise set out, the
Department generally has on file such definitions which are available.
If a task to be performed is not subject to one of the
classifications of pay set out, the Department will upon being
contacted state which neighboring county has such a classification and
provide such rate, such rate being deemed to exist by reference in
this document. If no neighboring county rate applies to the task,
the Department shall undertake a special determination, such special
determination being then deemed to have existed under this
determination. If a project requires these, or any classification not
listed, please contact IDOL at 618/993-7271 for wage rates or
clarifications.
LANDSCAPING
Landscaping work falls under the existing classifications for laborer,
operating engineer and truck driver. The work performed by landscape
plantsman and landscape laborer is covered by the existing
classification of laborer. The work performed by landscape operators
(regardless of equipment used or its size) is covered by the
classifications of operating engineer. The work performed by
landscape truck drivers (regardless of size of truck driven) is
covered by the classifications of truck driver.
|